80 percent jig available for the 80 pct lower receiver. This jig takes the guess work out of drilling the hammer pin hole, trigger pin hole, and the internal area pocket. Includes the master plate, two side plates, 3 top plate guides, screws for mounting the master plate to side plates, and screws for the top guide plates. The side plates mount into the front pivot pin and the rear takedown pin holes and are held by the master plate for perfect alignment. The top guide plates mount to the master plate as a guide for cutting of the internal pocket area.
This is by far the easiest Jig set ever put together for 80 percent lowers.
We now have them for both the AR15 and AR10 type lower.
This is the AR10 style Jig set.
These are not in stock right now. We are working on back orders right now and will start accepting orders again soon. Back orders will ship per first order in first out as we receive product from manufacturer. We will have them back soon, just a matter of catching up a bit.